What size basin fits a 600, 750, 900 or 1200 mm vanity?
A simple basin size guide for Australian vanities: which above-counter basin widths suit 600, 750, 900 and 1200 mm vanities, and how to check depth.

The most common question we hear in the showroom is simple: will this basin fit my vanity? Here is a quick way to answer it, using standard Australian vanity widths.
The rule of thumb
Leave roughly 80–100 mm of benchtop on each side of the basin. That keeps the vanity practical and stops the basin looking squeezed. Then check depth: the basin plus any deck-mounted tap behind it has to fit inside the benchtop depth.
| Vanity width | Basin width that suits | TOSSO examples |
|---|---|---|
| 600 mm | About 360–420 mm | Orb, Ring, Weave, Cube, Drum |
| 750 mm | About 400–550 mm | Column, Relief, Terra, Capsule, Mesa |
| 900 mm | About 500–610 mm | Slab, Ellipse, Vessel, Pebble, Aurum |
| 1200 mm and up | Any, or two basins | A pair of Rounds or two Capsules |
Don't forget the depth
Many vanity tops are about 450–460 mm deep. A round basin around 400 mm across leaves only a little room behind it for a deck-mounted mixer, so measure the tap's base before you commit. If space is tight, a wall mixer frees up the whole bench and suits most above-counter basins.
Height matters too
An above-counter basin adds its own height, roughly 120–155 mm across our range, to the benchtop height. If you are choosing a new vanity, consider a slightly lower cabinet so the rim lands at a comfortable height for everyone who uses it.
Double vanities
On a 1200 mm or longer vanity, two basins work well if each person gets about 600 mm of bench. Matching pairs look best centred in each half, with the taps lined up to the centre of each basin.
Every TOSSO listing shows the basin's length, width and height in millimetres, so you can check the fit before you visit. Bring your vanity measurements to the showroom and we will help you check it.

